• Ceramic Solid State Ionic Technologies
  • Separation/Purification Technologies
    • Sodium
      • Radioactive Waste Stream Recycling
      • Industrial Na Waste Stream Recycling
      • On-Site Sodium Methylate (SMO) Production for Transesterification
      • On-Site Hypochlorite Disinfection Systems
    • Oxygen
    • Lithium
    • Hydrogen
  • Advanced Energy Storage
    • Solid Electrolyte Batteries
    • Fuel Cells (SOFC, PCFC)
  • CO2 Beneficiation
    • Solid Electrolysis Cells (SOEC)
  • Highly Efficient Hydrogen Production
    • Electrolytic Hydrogen Production
  • Syngas Production
    • Solid Oxide Electrolysis Cell (SOEC)
    • Syngas (ITM)
  • Next-Generation Precision Sensors
    • Sodium
• Other Ceramatec Technologies
  • Fuel Processing
    • Cold Plasma Reforming
    • Hydrogen Recovery from Desulfurization
  • Synthetic Fuel
    • SOEC
    • Modular Fischer Tropsch
    • Plasma Reforming
  • Fly Ash Treatment for Reuse (Benefication)
    • Applications & Uses
  • Compact Microchannel Heat Exchangers and Reactors
  • Micro and Nano-Porous Ceramics
    • Structural (silica-free) Insulation
    • Refractory Consumables in Non-Ferrous Metal Melting
    • Machinable Ceramics
    • Alumina Waste Recycling
    • Diesel Particulate Filters
    • Microfabrication
    • Ceramic Fiber Optic Connectors
  • Hazardous Gas Treatment
    • Plasma Oxiders
    • Hydrogen Recovery from Desulfurization
  • Coatings
    • Oxide Coatings for Refractories & Ceramics
    • Anti-Fungal Coatings
    • Fire-Resistant Coatings for Wood, Carbon, Dry Wall and Plastics
    • Environmental Barrier Coatings
      • Metals
      • Ceramics
    • High Temperature Low Electrical Resistivity Coatings
  • Biomedical & Orthopedic Implants
  • Nanopowder Synthesis
  • Custom Electrode Development
  • Advance Materials Processing & Development
  • Heavy Oil & Shale Oil Upgrading
  • Next Generation Catalyst Supports & Substrates

Ceramic Fiber Optics Connectors

Ceramic fiber optics connectors are used in places like engine bays on aircrafts where there is high temperature (hence plastic connectors cannot be used). Typical ceramic fiber optics connectors are single fiber and made using a costly process. They take a lot of place in the cockpit & elsewhere on the aircraft.

By using Cercanam®, we have fabricated the first-of-its-kind, 12-fiber ceramic fiber optics connector (see picture below). Initial prototypes performed as well as the commercially available 12-fiber plastic MT.

While plastic MT connectors are rated up to ~70C, Cercanam® connectors performed well at temperatures as high as 120C.